Since 1946
Reliability
History of Cut
State of the art
Quality & Technology

About2

1050 BLOOM CUTTING

Saldotecnica is proud to be the first company in the world to have supplied a round bloom cutting machine on continuous curved casting capable of performing cuts on 1050 thicknesses.

This success is due to a deep experience in the modification and implementation of cutting quality on 800 mm thicknesses on Hercules - Acciaierie Bertoli Safau spa, part of the Danieli Spa group, resolving non-conformances equal to about 25% of the system cutting a competitor by reducing them to only 2,5%

The oxy cutting machine was supplied to SMS Concast AG, leader of the project basis on green field, with final destination to a Korean steel producer - Taewoong steel

Saldotecnica has carried out the engineering study of the plant including the carpentry, the supply of the cutting cars, the supply of fluid regulation panel, the powder feed system to allow the cutting of special steels, the emergency cutting system, and all stainless steel cooling spays for continuous casting.

Assembly and start-up have been carried out by SMS Concast independently proving the objective reliability of the system.

  • Structure
  • Together with Carro
  • General

1050 BLOOM CUTTING

Saldotecnica is proud to be the first company in the world to have supplied a round bloom cutting machine on continuous curved casting capable of performing cuts on 1050 thicknesses.

This success is due to a deep experience in the modification and implementation of cutting quality on 800 mm thicknesses on Hercules - Acciaierie Bertoli Safau spa, part of the Danieli Spa group, resolving non-conformances equal to about 25% of the system cutting a competitor by reducing them to only 2,5%

The oxy cutting machine was supplied to SMS Concast AG, leader of the project basis on green field, with final destination to a Korean steel producer - Taewoong steel

Saldotecnica has carried out the engineering study of the plant including the carpentry, the supply of the cutting cars, the supply of fluid regulation panel, the powder feed system to allow the cutting of special steels, the emergency cutting system, and all stainless steel cooling spays for continuous casting.

Assembly and start-up have been carried out by SMS Concast independently proving the objective reliability of the system.

  • Structure
  • Together with Carro
  • General

Our history

Our history

With a history of over 70 years, Saldotecnica is a pioneer in the field of oxy-cutting.

Always rooted in the territory in which saw born 70 years ago thanks to the intuition of its official founder Cav. Mr. Verna as a official distributor of technical components (Castolin), Saldotecnica under the guidance of the Magnani family from the 70 years up to 2000, Saldotecnica been able to adapt to the continuous innovation of the iron and steel industry going half a century and facing the new millennium as a reference point in oxy-cutting technology.

Saldotecnica was born immediately after the war as a company specialized in the marketing of welding materials.
1970 Saldotecnica Ligure is born as a manufacturer of oxycutting equipment such as manual torches for shipbuilding.
1975 The turning point that leads Saldotecnica to become a leading company in the world of oxycutting, in fact, begins the design and construction of complete systems for in-line cutting of billets, blooms and slabs. In collaboration with the US company, UCC develops machines for cold and hot scarfing.
1976 Saldosider srl is founded as a completely independent company based in Taranto, Saldosider deals mainly with the development of the plant engineering operating as a supplier of Saldotecnica ligure srl which becomes a commercial player on the market. 1977 The first slab cutting machine is sold.
1981 The first gouging machine is sold.

To date Saldotecnica can boast almost 1000 plants sold all over the world, some of them still working after 40 years of operation.
In 2015 a company leads to a radical change, Saldotecnica Ligure srl is sold to foreign investors and Saldosider srl, changes its name to Saldotecnica Europe srl becoming the only reference for the steel industry.
Today Saldotecnica is a young and dynamic company led by a new CEO Mr. Luca Giusti who from the technical sector with an ultra 20 experience annals restructure the old Saldotecnica replacing the pivotal figures giving a boost to the company growth.
A new operational director is hired by a new sales manager and a reference office is opened for the North East in Udine.

The new CEO's strategy will be oriented towards customer satisfaction and market diversification in order to seize different opportunities and expand the company's production capacity in order to foster growth by disengaging from critical suppliers and laying the foundations for total control of production and quality.

Production

Production

The DNA of Saldotecnica has its roots in the field of metalworking, from official representatives of Castolin (TM) we have subsequently signed an agreement for the production of equipment and machinery for ARMCO and Lincoln Electric.

Over the years' 60-'70 we have implemented our production with special equipment and machinery for heating, welding, cutting and scarfing. Today we are able to assist customers not only with our standard production, but also offering all the spare parts, structural work and mechanical parts.

Our company structure counts on an organized warehouse that allows us to respond to the needs of our customers in a short time. We can then count on two independent operative centers where precision machining is carriedon on our components and to a carpentry for our machines, the same are then assembled by us before shipment.

Carpentry department for the welding of small and medium sized products in carbon steel (S275-355, Corten A / B, Hardox) of stainless steel (AISI304l, 316L) titanium lances with patented welders ...
The area of ​​1000 approximately sqm includes n. 6 wire or Tig welding stations with relative positioners and lifting systems up to 10 ton.
Department of mechanical workshop on an area of ​​about 1250 square meters equipped with a large and flexible fleet of machines partially managed directly by the technical department directly from CAD-CAM.

Turning for diameters up to 650 mm and max lengths of 2100 mm. :
3 cnc axis lathe with automatic bar pusher
3 cnc axis lathe with automatic bar pusher
5 cnc axis lathe with automatic bar pusher
3 lathe with cnc axis
2 lathe with cnc axis
n. 2 Parallel lathes

Milling:
CNC 3 1000 × 600 CNC milling center
CNC 3 1600 × 900 CNC milling center
5 CNC high-speed 300 × 250 axis milling center
Traditional display cutter 1400 × 400 with front-mounted device

Deep drilling - gunning:
3 CNC drilling center for diam. Up to 6 mm and depth up to 250 mm
1 drilling center for diam. Up to 20 mm and depth up to 500 mm

The company, in full development planning, has already approved an 2016-2020 investment plan to implement production fully in line with our company policy of continuous improvement and cost containment by automating production processes;

Our machines

BILLETS / BLOOMS

BILLETS / BLOOMS

SLABS

SLABS

SLAB AND PLATES MILLS

SLAB AND PLATES MILLS

DEBURRING MACHINE

DEBURRING MACHINE

LADLE AND TUNDISH PREHEAT STATIONS

LADLE AND TUNDISH PREHEAT STATIONS

SCARFING MACHINES

SCARFING MACHINES

FORGE CUTTING MACHINES

FORGE CUTTING MACHINES

SCRAP CUTTING MACHINES

SCRAP CUTTING MACHINES

AUXILIARY AND SPARE PARTS

AUXILIARY AND SPARE PARTS

Contact us

  • Saldotecnica Europe Head Quarter

    Genoa (Italy)


    +39 010.6133849


    sales@saldotecnica.eu

  • Saldotecnica Americans

    Schererville, Indiana (USA)


    +1 219.983.2438


    mr. Naccarato V.


    sales@saldotecnica.eu

  • Saldotecnica Maco-India

    New Delhi (India)


    +91 983.004.1002


    mr. Hitesh Vasa


    hdv@macocorporation.com

  • Saldotecnica Turkey

    Istanbull (Turkey)


    +90 533.477.3872


    mr. Bilgin Kunac


    sales@saldotecnica.eu

  • SALDOTECNICA CIS

    Kramatorsk Ukraine


    +38 050.9124683


    tihonpostbox@rambler.ru

    OUR AGENTS


    • INDIA

      MACO CORPORATION PVT. LTD.
      Mr. Binod Kumar
      Mail: binod.k@macocorporation.com
      Tel: 0091 92345 1172


    • TURKEY

      ALP MUHENDISLIK MUMESSILLIK TIC. VE SAN. LTD.STI.
      Bilmo Kucuk Sanayi Sitesi, Aydinli Mah. Yanyol Cad.
      Melodi Sk. No: 40
      34953 Tuzla / Istanbul-TURKIYE
      Mail: bkunac@alpmuhendislik.net
      Tel: 0090 216 593 41 42


    • POLAND

      FORCAST POLSKA
      Mr. Jacek Zajac
      Mail: j.zajac@forcastpolska.com
      Tel: + 48 (32) 205 12 58
      Mobile: + 48 601 43 33 87

    • PERU'

      INTERFERRO SAC
      Mr. Jose B. Gutierrez
      Mail: interferro.peru@gmail.com
      Tel: + 51 1 459 6072


    • FAR EAST

      MACONAS
      Mr Win H. FINK
      Mail: win.fink@maconas.de



    • EGYPT

      TECNO EGYPT
      Mr Kareim Kamal, sanad
      Mail 1: kareimsanad@gmail.com
      Mail 2: k.sanad@saldotecnica.eu
      Mobile: + 2011 14382938
      Tel: +381 641981563
    • GERMANY

      TRIPLES
      Mr Ralf Morgenthaler
      Mail ralf@triples.solutions
      Tel + 49 781 970 60506


    • UKRAINE

      UKRAINE SALDOTECHNICS
      Mr Tyhon yevanof
      Mail: t.iefanov@saldotecnica.eu
      Tel:: 0038 050 912 46 83


      Englishitalianrussianspanishturkish